Schematic -
Parts List -
R1 - 1 - 10 Meg, 1/4 Watt Resistor
D1, D2 - 2 - 1N4003 Silicon Diode
C1, C2 - 2 - 10uF 350V Capacitor
C3 - 1 - 0.1uF 400 Volt Mylar Capacitor
T1 - 1 - 4KV Trigger Transformer (see "Notes")
FT - 1 - Flash Tube (see "Notes")
L1 - 1 - Neon Bulb
Q1 - 1 - 106 SCR
S1 - 1 - 115V 1A SPST Switch
MISC - 1 - Case, Wire, Line Cord
Notes -
1. This ciruits is NOT isolated from ground. Use caution when operating without a case. A case is required for normal operation. Do not touch any part of the circuit with the case open or not installed.
2. Most any diodes rated at greater then 250 volts at 1 amp can be used instead of the 1N4003's.
0 comments:
Post a Comment